- Out-of-Stock
All Cattegories
- SUPPLIES & MEDIA addremove
- ACCESORIES addremove
- DISPLAYS & MONITORS addremove
- COMPUTERS addremove
- PRINTERS addremove
- STORAGE DEVICES addremove
- IMAGING DEVICES addremove
- CABLES addremove
- POWER/RACK EQUIPMENT addremove
- POS / DATA CAPTURE DEVICES addremove
- COMMUNICATIONS
- INPUT/OUTPUT DEVICES addremove
- PRESENTATION DEVICES
- SECURITY addremove
- SYSYEM COMPONENTS addremove
- SECURITY DEVICES addremove
- SERVICES AND WARRANTIES addremove
- HEALTH AND WELLNESS
- Home
-
B2B Deals
Discounted
add remove
-
Computers
add remove
-
HOME APPLIANCES
New Offers
add remove
- HOME & APPLIANCES add remove
-
PRINTERS
add remove
All Cattegories
- SUPPLIES & MEDIA addremove
- ACCESORIES addremove
- DISPLAYS & MONITORS addremove
- COMPUTERS addremove
- PRINTERS addremove
- STORAGE DEVICES addremove
- IMAGING DEVICES addremove
- CABLES addremove
- POWER/RACK EQUIPMENT addremove
- POS / DATA CAPTURE DEVICES addremove
- COMMUNICATIONS
- INPUT/OUTPUT DEVICES addremove
- PRESENTATION DEVICES
- SECURITY addremove
- SYSYEM COMPONENTS addremove
- SECURITY DEVICES addremove
- SERVICES AND WARRANTIES addremove
- HEALTH AND WELLNESS
1m (3ft) MTP(F)/PC OM3 Multimode Fiber Optic Cable
UPC: 065030879026
Availability:
Out of Stock
local_shipping
Only 0 Available Online
- Write a review
$259.79
StarTech.com 1m (3ft) MTP(F)/PC OM3 Multimode Fiber Optic Cable, OFNP Plenum, 50/125µm, 40G, Low Insertion Loss, MPO Fiber Jumper Cord - 1m (3.3ft) MTP(F)/PC to MTP(F)/PC OM3 Fiber Cable; 40 Gbps; 50/125µm Core; Bandwidth: 2000MHz·km at 850nm w/ VCSEL source; Outer Diameter: 3.0mm; OFNP-rated Jacket; Temp Range: -10 to 70°C (14 to 158°F)
- Interface between different networking devices at varying speeds
- Optimize accessibility and install or remove connectors with one hand using the push-and-pull tabs
- MTP connectors use Type A straight-through pinout
About this product
Overview
This MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual 10Gbps devices.
The MTP connector provides twelve times the density of an SC connector and saves circuit card and rack space. Plus, the push-and-pull tabs optimize accessibility, by letting you install or remove the connectors with one hand without using additional tools.
The MTP to MTP cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire rating is required.
Each OM3 fiber cable has been individually tested for insertion loss and return loss. The full test report is included in each cable bag.
The MPO12PL1M from StarTech.com is backed by a lifetime warranty.
More from the Manufacturer
- Interface between different networking devices at varying speeds
- Optimize accessibility and install or remove connectors with one hand using the push-and-pull tabs
- MTP connectors use Type A straight-through pinout
- Get test data for your fiber cable - an insertion loss and return loss test report is included in each cable bag
- Save circuit card and rack space with twelve times the density of SC connectors