Plugable USB 3.0 4K DisplayPort Adapter

Performance

Featuring the highest-performance DisplayLink DL-5500 chipset, the Plugable UGA-4KDP graphics adapter lets you connect an additional DisplayPort display up to 3840x2160@30Hz (4K/UHD/2160p) to your Windows-based laptop, desktop, or tablet via USB 3.0.

Compatibility

• Drivers available for Windows 11/10/8.1/7.
• Supports Intel and M1 Macs on macOS 10.14+ with driver installation
• Monitor Compatibility
• Supports DisplayPort displays up to 3840x2160/4K. 3840x2160 mode has a refresh rate of 30Hz, while 3440x1440 supports 50Hz. 2560x1600, 2560x1440, 2560x1080, 1920x1080 (1080P) and lower modes refresh at 60Hz. 4K/UHD output requires compatible 4K/UHD display.
• Audio outputs in stereo format; 5.1 output not supported.
• If connecting a 4K HDMI display, an HDMI 1.4 ""active"" adapter such as the ""Plugable DP-HDMI"" must be used. Passive adapters and all DVI adapters will limit output to 2048x1152.
• Dual-link DVI monitors (Qnix, Yamakasi) not supported.

Application Compatibility

Does not support HDCP, and will not allow for playback of encrypted Bluray disks or copy-protected content.

Not recommended for gaming.

More from the Manufacturer

• Plugable is proud to be the first company in the USA to offer a 4K USB graphics adapter based on the DL-5500 chipset!
• Highest performance USB graphics solution available
• Combines both video and audio over a single USB cable and DisplayPort cable
• Hot-Plug, add or remove additional displays without system reboot